Proceq Profometer 5+ User Manual

24 Data © 2007 Proceq SA
7.2 Accessories / Spare Parts
Designation Article no.
Extension rod for universal probe and 390 00 076
ScanCar
Test block 390 00 270
Marking pen 390 00 280
Protective film for universal probe 390 00 084
Headset 390 00 085
Protection sleeve for indicating device 330 00 470
Transfer cable 9/9-poles 330 00 456
Printer cable 9/9+25-poles for printer with 330 00 460
serial interface
Interface converter serial/parallel for printer 390 00 188
with parallel interface
RS232/USB adapter 390 00 540
Upgrading from model S to model SCANLOG 390 00 090
7.3 Technical Data
7.3.1 Indicating Device Model S
- Non-volatile data memory for 40 000 measured values,
can be divided into 60 objects
-
Graphics LCD, 128x128 pixels with backlight
- Interface RS 232
- Software for direct printing. ProVista software for data
transfer to PC and editing
- Power supply with 6 batteries, 1,5V, LR6 for an
operating time of approx. 45h, or 30h with switched on
backlight. We suggest to use alkaline batteries
- Permissible ambient temperature for the whole device:
-10 °C to +60 °C
7.3.2 Indicating Device Model SCANLOG
Model SCANLOG is identical to model S but additionally
includes:
- «CyberScan» function for displaying the concrete cover
on the indicating device
- «Measure with Grid» function for grey scale display of
the concrete cover
- Extended data memory:
- Storage areas for «CyberScan»
- Storage areas for «Measure with Grid»:
500 pages with 16 x 15 = 240 measured values
each
- The maximum number of objects, however, remains
60; #200 000 and 300 000 are demo objects

Proceq Profometer 5+ Specifications

General

Brand	Proceq
Model	Profometer 5+
Category	Measuring Instruments
Language	English