Do you have a question about the Prochem Steempro SX2100 POWERMAX and is the answer not in the manual?
Introduction to the Steempro 2000, its models, and essential safety warning.
Essential safety warnings regarding electrical hazards, water immersion, and proper use.
Instructions for correct operation, avoiding damage, and chemical compatibility.
Steps before operating the machine, including power connection and general precautions.
Steps for preparing the machine, filling solution, and priming the pump for operation.
Essential daily checks and cleaning procedures for optimal machine performance.
Guide to diagnosing and resolving common problems like power, vacuum, or pressure failures.
| Pressure | 150 psi |
|---|---|
| Voltage | 230 V |
| Amperage | 13 A |
| Recovery Tank Capacity | 26 litres |
| Pump | 150 psi |
| Motor | 1.5 HP |