6
If Your Kettle Boils Dry
The Kettle element is protected by an automatic safety
device. If the Kettle is accidentally switched on without
water, or is allowed to boil dry, the Kettle will automatically
repeat a cycle of switching off, cooling down, and switching
back on. If this happens, you should:
1� Unplug the Kettle.
2� Wait about 20 minutes for the element to cool down and
then use as normal and check that the Kettle functions
correctly.
Cleaning and Descaling Your Kettle
w WARNING
Electric Shock Hazard� Never immerse the
Kettle in water or other liquids.
1� With Kettle unplugged, empty any remaining water and
rinse. Allow Kettle to cool.
2� To avoid scale/lime deposit buildup, empty Kettle after
each use.
3� If you have scale/lime deposit buildup, add 1/2 teaspoon
cream of tarter to your Kettle and fill to MAX fill line with
water. Switch Kettle on and allow to boil. Switch Kettle off.
Let sit for 15 minutes. Empty Kettle and rinse with fresh
water.
4� Wipe the exterior of Kettle with a damp cloth. Do not use
abrasive scouring pads or powders as they may scratch
the smooth surface of the Kettle.
To Next Page
Loading...
