Need help?Do you have a question about the PRODEM PRB 010 and is the answer not in the manual?
Highlights critical safety warnings regarding operator protection and bystanders.
Method for moving impact point from edge to interior for efficient breaking.
Emphasizes positioning the hammer at right angles to the material surface.
Warns against using the hammer as a sledgehammer to prevent damage.
Caution against driving chisel into ground, causing wear and reduced efficiency.
Prohibits using the chisel as a lever to prevent breakage.
States the hammer is not designed for lifting or transport loads.
Warns against standard use underwater without specific conversion and kit.
Prohibits using hammer or chisel for moving objects, which can cause damage.
Explains harm of blank blows and the function of Anti-Blank-Blow system.
Lists probable causes and remedies when the hydraulic hammer fails to start.
Identifies causes and solutions for reduced impact rate in the hammer.
Troubleshooting steps for inconsistent impact rates in the hydraulic hammer.
Addresses issues related to oil leaks between the back head and cylinder.
Diagnoses and remedies for oil leaks occurring at the accumulator.
Troubleshooting steps for oil leaks originating from the chisel area.
Identifies causes and solutions for excessive hydraulic oil temperatures.
Details common causes and fixes for gas leaks from the back head.
General| Brand | PRODEM |
|---|---|
| Model | PRB 010 |
| Category | Power Tool |
| Language | English |
To Next Page
