Need help?Do you have a question about the Producer's PRIDE 1339494 and is the answer not in the manual?
General| Brand | Producer's PRIDE |
|---|---|
| Model | 1339494 |
| Category | Farm Equipment |
| Language | English |
Connect side connectors and shoulder cross rails to form two shoulder frames.
Assemble side bent tubes and cross rails to create left and right side roof frames.
Assemble middle peak bent tubes and cross rails to form the middle peak frame.
Connect the shoulder frames, side roof frames, and middle peak frame to create the complete roof structure.
Insert upright poles into the right side of the assembled roof frame.
Insert upright poles into the left side of the assembled roof frame.
Connect upright poles and top upright poles to support the front and back of the structure.
Attach the door panel to the frame using bolts and nuts.
Install mesh panels between the frame poles, ensuring smaller mesh is at the bottom.
Install the front and back fabric panels, securing them with Velcro.
Insert tubes into bottom sleeves of fabric panels and secure with puller straps.
Lay the roof cover over the frame and center it, ensuring even overhang.
Insert tubes into the roof tarp's bottom sleeve and secure with web straps and ratchet tie-downs.
To Next Page
