Need help?Do you have a question about the PROEL M-8 and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Inputs | 8 |
| Effects | No |
| Type | Analog |
| Outputs | Control Room, Headphones |
| EQ | 3-band |
General safety and operating precautions for using the product.
Detailed safety instructions and precautions before using the product.
Instructions for handling product faults and when to contact service personnel.
Product compliance with EU directives (EMC and LVD) and relevant standards.
Guidelines for handling product packaging, shipping, and complaints.
Details about the product warranty, coverage, and return procedures.
Notes on installation, intended use, and disclaimers for damages.
Instructions for power supply connection and regular maintenance.
Welcome message and overview of the mixer's purpose and manual.
Tips for quickly starting to use the mixing console, especially for beginners.
Procedure for setting input levels using PFL and gain controls.
Steps for mixing signals, adjusting faders, and setting listening levels.
Tips for optimal sonic performance and safe operation.
Description of MIC (XLR) and LINE (1/4" jack) input connectors.
Explanation of GAIN, LO CUT, and HI EQ controls for mono channels.
Description of MID, LOW EQ, AUX 1, and AUX 2 controls.
Explanation of PEAK detector, SOLO switch, and their functions.
Function of the MUTE/ALT3-4 switch for muting and signal routing.
Description of the channel fader for adjusting signal level.
Description of MIC/LINE input connectors and GAIN control for stereo channels.
Description of EQ (HI, MID, LOW) and AUX 1 controls for stereo channels.
Function of AUX 2 control and BAL control for stereo channels.
Explanation of PEAK, SOLO, MUTE/ALT 3-4, and FADER controls.
How to use PRESETS and VARIATIONS selectors to choose and adjust effects.
Detailed descriptions of various reverb and delay presets.
Description of CHORUS, FLANGER, REVERB+DELAY, REV+CHORUS effects.
Function of TAP button, LED, and input jack for Tap Delay.
Function of MUTE button and PEAK/MUTE LED for the effect processor.
Connecting a footswitch for mute and controlling FX LEVEL to MAIN MIX.
Adjusting the level of the internal effect signal sent to the AUX 1 output.
Description of 2TRK input/output RCA sockets and their purpose.
Adjusting C.ROOM/PHONES level and description of outputs.
Description of AUX 1 OUT jack output for external connections.
Adjusting input levels for AUX 1 and AUX 2 RETURN signals.
Switch for ALT3-4 to MIX and ALT3-4 FADER control.
Control for MAIN MIX output level and description of balanced outputs.
Explanation of the LED level meters and their indication ranges.
Allows selecting between PRE FADER (PFL) or POST FADER (AFL) listening.
Description of balanced XLR outputs for the main mix.
Description of USB port and AC power supply connection.
Function of POWER and +48V phantom power switches.
Using the mixer as an external soundcard for recording/playback.
Important precautions for connecting and using the USB interface.
Steps for connecting and installing drivers on Windows OS.
Steps for connecting and configuring on Macintosh OS X.
Tips for optimizing Windows XP for DAW software usage.
Instructions for setting up the mixer for PC playback and recording.
Guide for setting up the mixer for DAW recording and monitoring.
Troubleshooting steps for issues related to no power.
Troubleshooting steps for issues with individual input channels.
Troubleshooting steps for issues with output signals.
Troubleshooting steps for issues related to distorted or incorrect sound.
Troubleshooting steps for identifying and resolving noise or hum issues.
Technical specifications for mono input channels.
Technical specifications for stereo input channels.
Technical specifications for master section outputs and controls.
Overall technical specifications and performance data.
Physical dimensions of the mixer.
Instructions for mounting the mixer in a rack.
Wiring for unbalanced LINE IN/OUT and 2TRK IN/OUT jacks.
Wiring for balanced LINE IN/OUT jacks.
Wiring for stereo headphone jack connections.
Wiring for balanced XLR MAIN MIX outputs and MIC INPUTs.
A diagram illustrating a typical connection setup for the mixer.
A template page for recording mixer settings for live performances.
A detailed block diagram illustrating the mixer's internal signal flow.
Blank page for user notes.
To Next Page
