To Next PageTo Next PageWhat to do if my Profi Care Fan does not work?
If your Profi Care Fan isn't working, first ensure it's properly connected to a functioning mains outlet. If the issue persists, it could be due to defective electronics, and you should seek assistance from a qualified dealer or service center.
Why is my Profi Care Fan not producing enough mist?
If your Profi Care Fan is not producing enough mist, there might be several reasons. First, check if water has collected in the tube underneath the switch housing and push the top section of the tube back to prevent water accumulation. Also, the humidifier might be dirty, so you should clean it. Finally, the water could be dirty, so replace the water.
What to do if mist escapes from my Profi Care Fan?
If you notice mist or water escaping between the water tank and the humidifier base of your Profi Care Fan, the bottom section of the tube might be too short. Pull back the bottom section of the tube so that the water tank fits securely on the base.
What to do if my Profi Care Fan is on but not producing mist?
If the POWER LED and one of the MOIST LEDs (LO / MI / HI) are lit, but no mist is being produced by your Profi Care Fan, the water tank is likely empty. Refill the water tank.
Why does my Profi Care Fan smell bad?
If there is a bad smell coming from your Profi Care Fan, the water is likely old or dirty. Replace the water and clean the humidifier.
Steps to unpack the appliance and connect it to power.
Details on fitting batteries, range, and proper use of the remote.
Tips for optimal humidifier use and ideal placement.
Instructions for assembling the base unit and stand tubes of the fan.
Instructions for assembling the fan motor, protection grid, and propeller.
Instructions for attaching the humidifier tube and water tank.
Guide on how to safely and correctly fill the water tank for the humidifier function.
How to set the fan inclination angle and use basic controls.
How to turn the appliance on and off, and mode persistence.
Explanation of the fan speed settings (LO, MI, HI).
How to use the timer function for automatic shut-off.
Explanation of the NAT (Natural) and SLE (Sleep) fan modes.
How to activate and deactivate the oscillation function.
How to control the intensity of the humidifier mist output.
General| Brand | Profi Care |
|---|---|
| Model | PC-VL 3069 LB |
| Category | Fan |
| Language | English |
