Profile 840000015 - Time Display Modes; Setting Week and Time; Setting the Day of the Week; Setting the Hour and Minute

Ref. : 840000015 Manual
Eltra nv, Pachtgoedstraat 2, 9140 Temse, BELGIUM 2
C. Time Display
There are two different kinds of time displays:
1. 12-hour display: the digital number is from 11:59 to 12:00 with AM or PM shown on the LCD
2. 24-hour display: the digital number is from 00:00 to 23:59, no AM or PM is shown on the LCD
3. To change from 12-hour display to 24-hour display, or vice versa, press CLOCK Button and hold it till the LCD
display changes. Press CLOCK Button again to return to original display.
D. Week and time settings
1. Week settings
1.1 Press and hold the SET Button until the week display flashes, which indicates setting is ready
1.2 Press V+ Button to increase the day, or V- Button to reduce the day, the sequence of the display is shown as
follows:
MoTuWeThFrSaSu
1.3 Press V+/∨－Button once will increase or reduce the day by sequence slowly. To press and hold the button, the
week display moves quickly. Release the button until your desired day of the week shown on the display. Press
SET Button to confirm your setting.
2. Time setting
2.1 After setting the day of the week, hour display flashes to indicate setting time can be started
2.2 Press V+Button to increase number of hour, or V－ Button to reduce.
2.3 Press V+/V－Button once will increase or reduce each hour slowly. To press and hold the button, the hour
display moves quickly. Release the button until your desired hour shown on the display. Press SET Button to
confirm your setting.
2.4 “Minute” display then flashes to indicate setting minute is ready. Repeat the same procedures in setting hour
as in #2.2 and #2.3 to set minutes.
3. Summer time settings
3.1. Press CLOCK Button and V－ Button at the same time to change to summer time, time display automatically adds
one hour and “S” is shown on the LCD.
3.2. By pressing Clock Button and V－ Button again to cancel the summer time setting.
Note:
LCD must be in real time display to start week and time setting. If LCD is in program setting display, press CLOCK
Button once to return to real time display.