Appendix 1
Over-Encapsulating Tablets into Capsules
INSERTING TABLETS INTO OUTER CAPSULES
The number of holes will differ by size. This does not affect the instructions for use except where noted.
Capsule
Size
Number of Outer
Capsules in Filler
Number of Holes
in Attachment
Number of
Cycles
A, B, D 270 90 3
AA, AAel 180 180 1
AAA 120 120 1
1. These instructions begin after outer
capsules are oriented, separated, and seated
into Filler.
2. Place the OE Guide Tray on the Filler. 3. Pour tablets onto ATF and tilt in all directions
moving capsules into slots.
To Next Page
Loading...