To Next PageTo Next Page
Need help?Do you have a question about the ProFlow Water softener and is the answer not in the manual?
Specifies minimum and maximum operating pressure limits for optimal performance.
Details acceptable ambient and water temperature ranges to prevent damage.
Outlines voltage, frequency, and connection requirements for the unit.
Instructions for filling the resin tank with softening resin.
Steps for attaching the control valve and connecting the brine tank.
Connecting water supply and output, and setting up bypass options.
Installing single, dual, or triple systems with various bypass configurations.
Connecting drain lines, electrical power, service valves, and interconnect cables.
Steps to safely introduce water pressure and purge air from the system.
Initial programming of the control panel and setting residual hardness.
Manual process to start the softener's regeneration cycle.
Understanding system modes and display information during operation and regeneration.
Managing system behavior during power interruptions or timer issues.
Using manual controls and installer-level parameter configuration for various models.
Performing regular checks and isolating the unit from the water supply.
Managing water conditioner salt levels and resin cleaning procedures.
Maintaining system hygiene and using automatic rinse features.
General| Brand | ProFlow |
|---|---|
| Model | Water softener |
| Category | Water Dispenser |
| Language | English |
