Need help?Do you have a question about the ProFusion H-5511 and is the answer not in the manual?
Wipe the unit with a soft, damp cloth. Do not use solvents. Dry completely.
Store heater in a cool, dry location with the power cord secured. Use original carton or suitable container.
Remove heater from box, ensure unit is OFF before plugging into a wall outlet.
Plug into a 110-120V AC, 60Hz outlet. Turn knob to desired heat setting (LOW/HI).
Equipped with a thermal cut-off safety device that automatically shuts off the heater.
Automatically cuts power if the unit is accidentally tipped over.
General| Power | 1500 Watts |
|---|---|
| Adjustable Thermostat | Yes |
| Overheat Protection | Yes |
| Tip-Over Switch | Yes |
| Remote Control | Yes |
| Power Source | Electric |
| Voltage | 120 Volts |
| Timer | Yes |
To Next Page
