Need help?Do you have a question about the progeo JOKER Series and is the answer not in the manual?
General| Product Category | Wheelchair |
|---|---|
| Brand | Progeo |
| Model | JOKER Series |
| Material | Aluminum |
| Maximum user weight | 100 kg |
| Weight Capacity | 100 kg |
| Frame Material | Aluminum |
| Armrest Height | Adjustable |
| Foldable | Yes |
| Wheel Size | 24" |
Adjusting front wheel height by changing caster position on the fork.
Adjusting front wheel height by sliding the fork support along the frame.
Adjusting fork angle using a spirit level and specific rings for precise alignment.
Adjusting fork angle for V-Design fork supports using a specific axle mechanism.
Adjusting fork angle for V-Design 2.0 fork supports using grab screws.
Adjusting the height of the rear of the wheelchair for optimal positioning.
Adjusting the wheelchair's center of balance by sliding the frame within clamps.
Adjusting wheel inclination (camber) and alignment (convergency) for proper rolling.
Adjusting the position and function of the wheelchair brakes for effective stopping.
Adjusting brake clearance relative to the wheel for optimal performance.
Adjusting footplate distance for the 7° front frame taper.
Adjusting aluminum and curved tube aluminum footplates on the 7° frame.
Adjusting fixed carbon fibre footplates on the 7° frame for height.
Adjusting footplate distance for the "Zero" frame, including height and positioning.
Adjusting double, flip-up aluminum, and flip-up carbon fibre footplates for the "Zero" frame.
Adjusting the front frame rigidizer for compatibility with different footplates.
Adjusting the height of aluminium, titanium, and carbon fibre backrests.
Adjusting the backrest angle for user comfort and wheelchair stability.
Adjusting the quick release axle for safe and secure rear wheel attachment.
To Next Page
