Feature Description
Soft Start and Stop
The table lift will accelerate to maximum speed
and decelerate to a stop to ensure smooth travel.
Memory Presets
The Smart Remote has the ability to save preset height locations
for convenience. Set the numbered buttons on the Smart Remote
for quick and seamless adjustment.
Anti-Collision
The Anti-Collision feature will help protect the table lift against obstacles
which impede the motion of travel. There are 3 force settings which can
be detected during travel, 22lbs, 33lbs, and 44lbs.
Input Voltage 120VAC, 60 Hz
Output Voltage 24VDC
Stroke (movement) 25.5"
Height Range (without tabletop) 23.5” - 49”
Weight Capacity (load) 330 lbs (110 lbs per leg)
No Load Speed 1.57"/s
Full Load Speed 1.18"/s
Duty Cycle 10% (2 minutes on, 18 minutes off)
Operating Noise < 50 dB
Frame Material SPCC/ SPHC Steel
Finish Powder Coat - Grey(RAL7045)
Leveling Adjustable Leveling Feet
Low Power Mode Standby < 0.1W
Certification UL and BIFMA United Certificate
Specifications
2
To Next Page
Loading...
