18
TOOL KIT
ASSEMBLY INSTRUCTIONS
3 easy steps to assemble your treadmill then you're ready to workout.
Step 1
A.Place the treadmill in the upright position on a level at surface.
B. Semi-tighten the Screw(28) with Curved Gasket(18) by turning it in a clockwise direction into the holes on the
Stand Tube , and tighten it by Wrench.
C. Tighten the Screw(20) with Spring Washer(19) by turning it in a clockwise direction into the hole on the Stand
Tube (84).
To Next Page
Loading...