The Project E Beauty LED Light Therapy Mask (Model No. PE727) is a device designed for cosmetic use to treat various skin conditions and rejuvenate the skin. It utilizes colored LED lights to deliver pure light, aiming to reduce scar tissue and provide high-quality LED photon treatment. The mask is scientifically validated to achieve efficient results faster than traditional methods.
Function Description:
The mask employs photon light therapy, leveraging the natural healing properties of different light wavelengths to address various skin tissue issues. It uses state-of-the-art LEDs to provide pure light, specifically compared to systems that use traditional light bulbs. Modern semiconductor technology allows dermatologists to perfect the wavelengths of light generated, meaning more of the healing energy of the light reaches the skin tissue.
The device works by exposing the skin's tissue surface to light, which activates natural photoreceptors and allows skin cells to absorb the energy. This process accelerates biochemical reactions in the skin tissue, leading to faster healing times and increased collagen production. This can reverse some of the severe effects of aging. The technology is safe, and cosmetology experts agree that these treatments have no noticeable side effects when administered correctly. The LED photon mask is an important component of a complete skincare routine and should only be used for cosmetic purposes. It is not intended to diagnose, treat, cure, or prevent any disease.
The mask is designed in a facemask-shaped, comfortable, and flexible silicone material. It features 66 LEDs to provide a power intensity of 30mW/cm², with red and blue light settings for various skin concerns. It is wireless and uses USB Type-C for charging, making it convenient for use anywhere.
Benefits of Photon LED Therapy:
- Red Light (~630 nm): This setting allows the LED mask to penetrate the skin more deeply, approximately 8-10 mm. Red light stimulates cells that lie at this layer, including fibroblasts, which aid in collagen production. It can reduce wrinkles, make skin elastic and smooth, and is ideal for improving skin in the area around the eyes and forehead. It helps repair damaged skin.
- Blue Light (~465 nm): This setting allows the energy from the LED mask to penetrate the skin approximately 0.5 mm. It is optimized for use with rashes and is suitable for skin that is sensitive or constantly oily. Blue light can help reduce acne and even tighten skin that has loosened. It can quickly inhibit inflammation and potentially destroy harmful bacteria.
Important Technical Specifications:
- Model: PE727
- Power Supply: Internally powered by 3.7V DC, 2600mAh, 9.62Wh Lithium battery
- Weight: 290g ± 10g
- Dimensions: 390 x 230 x 65 mm
- Wavelength: Red LED: 630 nm ± 10nm; Blue LED: 465 nm ± 10nm
- Number of LEDs: 66
- Power Density: 30-40mW/cm²
- Charging Time: 4 hours
- Waterproof IP Rating: IP22
- Operating Environment: Temperature: -10-35°C; Humidity: 30-80%RH; Atmospheric pressure: 700hPa to 1060hPa
- Storage Environment: Temperature: -20-60°C; Humidity: 30-90%RH; Atmospheric pressure: 700hPa to 1060hPa
- Safety and EMC: IEC 60601-1, IEC 60601-1-2, IEC 60601-1-6, IEC 60601-1-11, IEC 60601-2-57
- Biocompatibility: ISO 10993-1, ISO 10993-5, ISO 10993-10
Usage Features:
The device includes a controller with a power button, anti-wrinkle mode indicator (Red Light), anti-acne mode indicator (Blue Light), and a battery indicator.
- Initial Charge: Before first use, charge the device for 4 hours.
- Charging: Insert the USB Type-C cable into the controller and connect the power supply to a suitably grounded outlet. The mask will not illuminate during charging. The battery indicator flashes green while charging and turns solid green when fully charged. If the remaining power is ≥25%, it indicates green; if <25%, it indicates red.
- Wearing the Mask: The device comes with an adjustable strap. Thread the strap through the inlet holes on either side of the mask and adjust it comfortably around your head and secure firmly.
- Connecting the Controller: Connect the mask to the controller with the USB cable.
- Turning On/Off: Press and hold the power button on the controller for 2 seconds to turn on the mask. The default mode is Anti-Wrinkle (Red Light), and the corresponding indicator will light up. To turn off, press and hold the power button for 2 seconds.
- Changing Modes: Short press the power button on the controller to change the mode to Anti-Acne (Blue Light), which is intended to treat mild to moderate acne.
- Treatment Duration: The mask automatically shuts down after a 10-minute treatment.
- Recommended Use: A 10-minute treatment per day, 3-5 times per week, is recommended. Overtreatment is not advised.
- Precautions: Do not use makeup or cosmetics containing chemical or acidic components that may affect light output. Always ensure to never look directly into the LEDs.
Maintenance Features:
- Cleaning: Clean the mask surface with a soft cloth after each use.
- Storage: Ensure the device is switched off when cleaning. Immediately dry the surface if it comes into contact with moisture, chemicals, or water.
- Sterilization: Always keep the device clean and sterilized.
- Storage Location: Store the device in a clean and dry place.
Need help?
General
To Next Page