5
ASSEMBLY INSTRUCTIONS
SINK
Lay the sink basin (A) upside down on the oor
or a sturdy table top.
Note: The back “lip” should hang off of the at
surface to prevent bending or breaking.
3.
4.
2.
1.
Screw 4 sink feet (D) onto the lower legs by hand
until tight. You will be able to unscrew each foot
as needed to level the sink on an uneven oor
once it is in its nal position.
Insert 4 lower legs (C) into the bottom of the
upper legs. Push the lower legs into the upper
legs until tight, or when you hear, or feel a “click”.
Insert 4 upper legs (B) into the corners of the sink
basin. Push the upper legs into the sink until tight,
or when you hear, or feel, a “click”.
A
B
C
D
To Next Page
Loading...
