To Next PageTo Next PageWhat to do if Project Source Indoor Furnishing drawers don't close correctly?
If the drawers of your Project Source Indoor Furnishing do not close correctly, ensure that the cabinet is installed level and plumb. If the issue persists, adjust the drawer front as required.
How to fix Project Source 5217236 doors that don't line up?
If the doors of your Project Source Indoor Furnishing do not line up, make sure the cabinet is installed level and plumb. If they still don't align, adjust the hinge as required.
Critical warnings about installation safety and cautions for inventory checks.
Includes estimated assembly time and tools required for assembly.
Instructions for inserting wooden dowels using a rubber mallet.
Securing minifix shafts with a phillips head screwdriver.
Inserting minifix cam locks correctly with attention to arrow orientation.
Placing epoxy runners and securing with euro/CSK screws.
Attaching hinge mounting plates and shelf support hardware.
Inserting hinges and attaching bumpers to the door.
Attaching bumper pads and minifix shafts to the drawer front.
Securing the drawer box using CSK screws 1 1/2".
Securing the epoxy bottom runner to the drawer box underside.
Assembling cabinet parts and securing with minifix cams.
Inserting the back panel into the cabinet structure.
Completing cabinet assembly and ensuring cams are locked.
Installing leg mounting brackets on the cabinet underside with screws.
Inserting the assembled drawer box into the cabinet.
Inserting the shelf using shelf support hardware.
Mounting doors to the cabinet using hinges and mounting plates.
Final step indicating completion of the assembly.
Adjusting door position left/right using a screwdriver.
Adjusting door position forward/backward using a screwdriver.
Adjusting door position up/down using a screwdriver.
Instructions for removing the drawer and re-installing it after adjustment.
Adjusting drawer alignment for proper positioning and movement.
Measuring and marking screw hole positions for leg clips.
Attaching leg clips using pan head screws.
Creating pilot holes for screw insertion.
Recommendations to protect cabinetry finish from sunlight and temperature.
Guidelines for dusting, polishing, and cleaning cabinet surfaces.
Procedures for cleaning spills and routine maintenance.
Solutions for misaligned cabinet doors.
Solutions for drawers not closing properly.
Details on what the warranty includes and how long it lasts.
Project Source's responsibilities for repairs or replacements under warranty.
Lists warranty exclusions, implied warranty disclaimers, and variations.
Instructions for contacting customer service for warranty claims.
List of available replacement parts with quantities.
General| Brand | Project Source |
|---|---|
| Model | 5217236 |
| Category | Indoor Furnishing |
| Language | English |
