22
TABLE OF CONTENTS
PRODUCT SPECIFICATIONS
Package Contents......................................................................................................................................3
Bits Included..............................................................................................................................................4
Safety Information......................................................................................................................................5
Preparation................................................................................................................................................9
Operating Instructions..............................................................................................................................10
Care and Maintenance.............................................................................................................................13
Troubleshooting...................................................................................................................................13
Warranty...................................................................................................................................................14
SPECIFICATIONS
Type CDT112W1U (CDT - designation of machinery, representative of drill driver)
Voltage
12V
No load speed
0-750 /min
Number of clutch positions
18+1
Max torque
130 in/lb (15N.m)
Chuck capacity
3/8” (10mm)
Max. drilling
capacity
Steel 1/4” (6.35mm)
Wood 3/4” (19.05mm)
Charger input (ACG1204LW) 120V~60Hz, 0.2A
Charger output (ACG1204LW) 12V
0.45A
Charging time 3-5hr
Battery capacity (ABP1215HLW) 1.5Ah
Machine weight 2.10 lbs (0.95kg)
To Next Page
Loading...