Project Source RPV31-PS

Questions and Answers

J
James NelsonAug 8, 2025
Why Project Source Vacuum Cleaner does not capture debris?
- M
  Melissa ZunigaAug 8, 2025
  There are several reasons why your Project Source Vacuum Cleaner might not be picking up debris. It could be due to a low battery, so try charging it. The impeller might be jammed; power off the vacuum and check for obstructions, removing them carefully with a small tool. A broken impeller or suction nozzle flap, a full or damaged filter cage, or a detached outlet valve can also cause this—replace the faulty parts. Lastly, very fine debris (less than 250 microns) won't be collected by the filter bag.
T
Tiffany LyonsAug 15, 2025
What to do if Project Source Vacuum Cleaner can not be charged?
- B
  Benjamin BennettAug 15, 2025
  If your Project Source Vacuum Cleaner isn't charging, the battery may be damaged and require replacing the main body. Ensure the charger base is properly assembled and the contact plates are connected. Also, the external adapter might be damaged, requiring a replacement. Using the wrong adapter can damage the vacuum and void the warranty.
Q
qeverettAug 22, 2025
How to fix Project Source Vacuum Cleaner that does not move smoothly?
- E
  evanfergusonAug 22, 2025
  If your Project Source Vacuum Cleaner isn't moving smoothly, the wheel might be jammed. Try cleaning out any debris from the wheel.
R
rmasonAug 30, 2025
What to do if pole connector can’t be secured on Project Source Vacuum Cleaner?
- C
  Christopher MartinezAug 30, 2025
  If the pole connector of your Project Source Vacuum Cleaner can't be secured, the side pin on the pole connector might be broken. Replace it with a new pole connector.

Summary

Safety Information

External Adaptor and Charging Base

Safety guidelines for the proper use and handling of the external adaptor and charging base.

Getting Started

Charging the Battery

Instructions for fully charging the electric vacuum before its first use.

Assembly

Suction Head Assembly

Steps to correctly insert and secure the suction head onto the pool vacuum.

Telescopic Pole Connector Assembly

Procedure for attaching the telescopic pole connector to the main body of the vacuum.

Telescopic Pole

Instructions on how to attach the telescopic pole to the assembled connector.

Operation

Emptying the Filter Cage

Guide on how to properly detach, clean, and re-install the filter cage.

Maintenance & Storage

Troubleshooting

Project Source RPV31-PS Specifications

General

Model	RPV31-PS
Brand	Project Source
Cord Type	Corded
Voltage	120 V
Type	Handheld
Power Source	Corded Electric
Cord Length	16 feet
Included Accessories	Crevice tool and brush

Project Source RPV31-PS - User Manual

Table of Contents