3.2.10: STARTER BATTERY VOLTAGE HIGH
An alert will be sent when the battery
voltage is higher than the alarm value
set by the user
Voltage setting range： 7~95 V
The alert will stop once the battery
voltage reaches the resume value set by
the user.
3.3: GENERAL SETTINGS
1. Reminder interval setting:
interval range: 100~10000 h
2. Reset maintenance will reset the time interval.
3. Reset battery is used when replacing
the battery. The SOC will reset with the
current state of the battery.
4. This will set SOC to 100% directly.
It can be used when battery is fully
charged but SOC is not 100%
1. 2.
3. 4.
18
To Next Page
Loading...