To Next Page
F
fjimenezSep 1, 2025
What to do if my Projecta Motorhomes unit displays 'Internal temperature high'?
- BbanksericaSep 1, 2025
If your Projecta Motorhomes unit displays 'Internal temperature high', allow the internal components to cool.
What to do if my Projecta Motorhomes unit displays 'Internal temperature high'?
If your Projecta Motorhomes unit displays 'Internal temperature high', allow the internal components to cool.
What should I do if my Projecta Motorhomes unit says the 'Environment temperature is high'?
If your Projecta Motorhomes unit displays 'Environment temperature is high', allow the environment to cool.
What to do if my Projecta Motorhomes unit displays 'Environment over temp'?
If your Projecta Motorhomes unit displays 'Environment over temp', allow the environment to cool.
What to do if my Projecta Motorhomes unit displays 'Output short circuit'?
If the Projecta Motorhomes unit displays 'Output short circuit', inspect the output for shorts.
What to do if my Projecta Motorhomes unit displays 'Short circuit'?
If the Projecta Motorhomes unit displays 'Short circuit', inspect the circuit for shorts.
What to do if I see 'Battery voltage high' on my Projecta Motorhomes unit?
If the Projecta Motorhomes unit indicates 'Battery voltage high', you should check the battery voltage.
What to do if I see 'Battery voltage low' on my Projecta Motorhomes unit?
If the Projecta Motorhomes unit indicates 'Battery voltage low', you should charge the battery.
General| Model | INTELLI-RV PM400 |
|---|---|
| Category | Motorhomes |
| Output Voltage | 12Vdc |
| Maximum Output Current | 40A |
| Battery Type | AGM/Gel/Calcium |
| Charging Stages | 7 |
| Protection Features | Over Temperature, Short Circuit, Reverse Polarity |
| Operating Temperature | 50°C |
Explains the multi-stage charging algorithm for service batteries.
Details the built-in Maximum Power Point Tracking solar charger for the service battery.
Describes the built-in relay that disconnects loads when battery voltage drops too low.
Explains the system for measuring battery voltage, current, and remaining AH.
Provides a detailed view and connection table for the PM435 unit.
Covers general installation guidelines for the PM435 unit on surfaces or walls.
Provides explanations for symbols used on the monitor display.
Details how to set battery capacity and battery type using dip switches.
Guides on accessing and configuring settings via the monitor, including passcode.
Outlines the main menu options for configuring the monitor settings.
Explains the status and meaning of LEDs on the PM435 unit.
Lists and describes error codes displayed on the monitor for troubleshooting.
