To Next Page
T
Tina MaynardAug 23, 2025
What to do if I see 'Battery voltage low' on my Projecta Motorhomes unit?
- TThomas MartinezAug 23, 2025
If the Projecta Motorhomes unit indicates 'Battery voltage low', you should charge the battery.
What to do if I see 'Battery voltage low' on my Projecta Motorhomes unit?
If the Projecta Motorhomes unit indicates 'Battery voltage low', you should charge the battery.
General| Model | INTELLI-RV PM400 |
|---|---|
| Category | Motorhomes |
| Output Voltage | 12Vdc |
| Maximum Output Current | 40A |
| Battery Type | AGM/Gel/Calcium |
| Charging Stages | 7 |
| Protection Features | Over Temperature, Short Circuit, Reverse Polarity |
| Operating Temperature | 50°C |
Explains the multi-stage charging algorithm for service batteries.
Details the built-in Maximum Power Point Tracking solar charger for the service battery.
Describes the built-in relay that disconnects loads when battery voltage drops too low.
Explains the system for measuring battery voltage, current, and remaining AH.
Provides a detailed view and connection table for the PM435 unit.
Covers general installation guidelines for the PM435 unit on surfaces or walls.
Provides explanations for symbols used on the monitor display.
Details how to set battery capacity and battery type using dip switches.
Guides on accessing and configuring settings via the monitor, including passcode.
Outlines the main menu options for configuring the monitor settings.
Explains the status and meaning of LEDs on the PM435 unit.
Lists and describes error codes displayed on the monitor for troubleshooting.
