5
PRODUCT OVERVIEW
Battery Status LED Jumpstart Status LED Audio Alarm Description
On Charging
Yellow (Flashing) The jumpstarter is being charged
Green (Solid) The jumpstarter is fully charged
Rapid Recharge from Alternator
Red/Green (Flashing) The jumpstarter is being charged
Green (Flashing) The jumpstarter is fully charged
Not On Charge – Press “Test” Button to Check internal Battery Status
Green (Solid) Battery is full and ready for use
Yellow (Solid) Not fully charged but still good to use
Red (Solid) Internal battery voltage is low and needs
to be charged. It might not have sufficient
capacity to jumpstart the vehicle.
Red (Flashing) Internal battery voltage is too low and
needs to be charged immediately.
Jumpstarter connected to the car battery (>3V) or Press Override Button
Green (Solid)
Error Indication
Red (Solid) On Reverse Connection or Input over-voltage
is detected
Red (Flashing) On Short-circuit, overload or over-temperature
is detected
LED INDICATION
Jumpstarter Battery
Status Indicator (LED)
Jumpstarter Battery Status
Test Button
Ergonomic, Easy to
Grip Handle
Jumpstarter Status
Indicator (LED)
Durable rubber
over moulded
body
Premium Spark
Free Clamps
Docking Station Charging Pins
AC Charger
Compact and
Lightweight
Reinforced cable
connection
Override Button