KEEP FINGERS AWAY FROM FAN: Putting ngers in way of moving fan can cause
serious injury.
KEEP FINGERS AWAY FROM SHARP OBJECTS: Putting ngers in way of sharp
objectscan cause serious injury.
CAUTION: Indicates the possibility of loss of data or damage to equipment.
WARNING: INDICATES THE POSSIBILITY OF INJURY OR DEATH TO PERSONNEL.
THIS GLOBAL HARMONIZED SYSTEM LABEL FOR LOW LEVEL TOXICITY. THIS
INCLUDES RESPIRATORY, SKIN, AND EYE IRRITATION, SKIN SENSITISERS AND
CHEMICALS HARMFUL IF SWALLOWED, INHALED OR IN CONTACT WITH SKIN.
THIS GLOBAL HARMONIZED SYSTEM LABEL FOR CORROSIVE CHEMICALS, MAY
CAUSE SEVERE SKIN AND EYE DAMAGE AND MAY BE CORROSIVE TO METALS.
THIS GLOBAL HARMONIZED SYSTEM LABEL IS FOR LOWER SYSTEMIC HEALTH
HAZARDS
THIS GLOBAL HARMONIZED SYSTEM LABEL WARNS HAZARDOUS TO AQUATIC
LIFE AND THE ENVIRONMENT.
WEAR GLOVES: Wear the appropriate gloves when required. For example, when
touching surfaces that may contain or have been exposed to materials, wear nitrile
gloves. Heat gloves are necessary when touching surfaces that may be hot to ensure
burns don’t occur.
ULTRAVIOLET RADIATION INSIDE: Exposure may cause eye damage. Do not operate
without covers. Wear UV eye protection.
NOTE: A note signies important information but not information of a critical
content.
Safety Guidelines
General
The 3D printer system is designed with built in safety features, improper use can cause
injury to personnel.
Follow these safety guidelines when operating the printer:
Read and follow all 3D printer system instructions. Printer should only be operated by
trained personnel.
Follow all safety rules and heed all cautions and warnings in this guide.
Do not attempt to open top door while printing.
To Next Page
Loading...
