ProJet MJP 2500 User Manual

8/10/22, 12:09 PM
Quick Start Guide
infocenter.3dsystems.com/projetmjp2500/print/book/export/html/861
1/44
Quick Start Guide

ProJet MJP2500/MJP
2500 Plus

Quick Start Guide

p/n 33-D129 Rev D

Original Instructions
Please refer back to http://infocenter.3dsystems.com/projetmjp2500/quick-start-
guide for the most up-to-date quick start guide
Important Safety Information
Safety Symbols and Denitions
UV RADIATION HAZARD: Invisible UV radiation is accessible in the vicinity of this
sign or behind the panel. Radiation can cause eye injury or blindness, burn injury
and/or re. Access panels are for service only and should be openedonly by
certied service personnel.
ELECTRICAL SHOCK HAZARD: High voltage electricity is accessible in the vicinity
of this sign or behind the access panel. High voltage can cause severe burns or
death, as well as res. Access panels are for service only and should be opened
only by certied service personnel or trained maintenance personnel.
HOT SURFACE HAZARD: A hot surface is accessible in the vicinity of this sign or
behind the access panel. Avoid contact. Hot surfaces can cause burn injury or re.
Allow surface to cool before touching. Access panels are for service only and
should be opened only by certied service personnel or trained maintenance
personnel.
®

ProJet MJP 2500 Specifications

General

Technology	MultiJet Printing (MJP)
Software	3D Sprint
Build Volume	294 x 211 x 144 mm
Layer Thickness	32 µm
Resolution	800 x 900 x 790 DPI
Materials	VisiJet M2R-WT, VisiJet M2R-BK
Layer Resolution	32 µm
Power Requirements	100-240 VAC, 50/60 Hz

Summary

Important Safety Information

Safety Symbols and Definitions

Explains hazard symbols and their meanings for safe operation.

General Safety Guidelines

Provides overarching safety rules for printer operation and handling materials.

Health and Environmental Hazards

Details risks like irritants, toxic materials, and environmental impact from printer materials.

Flammability Hazards

Discusses combustible properties of materials and necessary fire safety precautions.

Introduction to the ProJet MJP 2500 System

VisiJet Material Overview

Lists and describes the available VisiJet part and support materials compatible with the printer.

Printer Overview and Components

Printer System Components

Identifies key hardware parts like the Print Engine, Build Chamber, and Material Delivery Module (MDM).

Material Delivery Module (MDM)

Details the function and parts of the MDM, including cartridge bays and waste bag receptacle.

Essential Documentation and Resources

Additional System Guides

Lists related documentation such as Facility Requirements, Installation, and Material Guides.

Safety Data Sheets (GHS/SDS)

Explains the importance and availability of material safety data for safe handling.

Navigating the User Interface

Status Tab Overview

Covers printer status, job progress, and current printer states for monitoring.

Prints Tab Management

Manages the print queue, job ordering, and detailed job information.

Materials Tab Information

Displays material levels, status, and detailed information for loaded cartridges.

Tools Tab Functions

Provides access to diagnostics, usage statistics, maintenance, and upgrades.

Settings Screen Configuration

Allows configuration of network, email alerts, date/time, language, and print job settings.

Printer Operation Procedures

Printer Startup and Demo Build

Guides through powering on the printer and performing an initial test print.

Material Cartridge Management

Covers the procedures for installing and removing material cartridges from the MDM.

Waste Bag and Print Platform Handling

Details procedures for changing the waste bag and managing the print platform.

Printer Shutdown and Storage

Printer Shutdown Procedure

Explains the steps to properly power down the printer via the user interface.

Long-Term Storage Guidelines

Provides instructions for preparing the printer for extended periods of non-use, including dry-out procedures.