Power Supply: In the rear of the printer there is an outlet to plug in the power supply cord
and a switch to turn the system on. This is the only way to power the printer on from a
complete shutdown state. Do not use this switch to shutdown printer. Printer should be
shutdown through the UI and brought back up by toggling the power switch on the back. (A)
CAUTION: It is advised to never pull the plug or use the switch as a means to power
down the printer, always power off through the Shutdown process on the UI.
NOTE: Unless the printer will not be used for a substantial period of time (>60 days), it
is best to leave it powered on, as a result, the printer will automatically go into a
Standby state.
Additional Documentation
The following documents will help you to achieve maximum prociency with your ProJet®
MJP 2500 .
ProJet® MJP 2500 Facility Requirements Guide
The Facility Requirements Guide details the requirements necessary to install the ProJet®
MJP 2500 3D Printer. Details include the necessary facility dimensions, electrical and
pneumatic resources, and any equipment that may be needed for installation. An electronic
version of this document is available at
http://infocenter.3dsystems.com/projetmjp2500/facility-requirements-guide.
ProJet® MJP 2500 Installation Guide
The Installation Guide details the procedures required to properly install and set up the
ProJet® MJP 2500 3D Printer at the customer’s site. Only a 3D Systems Certied Field
Service Engineer or a Certied Reseller is allowed to install the 3D printer system. An
electronic version of this document is available at
http://infocenter.3dsystems.com/product-library/projetmjp2500-service.
ProJet® MJP 2500 Material and Post Processing Guide
The Material Guides detail the use of materials that have been certied for use in the
ProJet® MJP 2500. Each material has its own Material Guide. Information specic to each
material is included in these guides. An electronic version of this document is available at
http://infocenter.3dsystems.com/projetmjp2500/post-processing-guide.
ProJet® MJP 2500 Quick Start Guide
To Next Page
Loading...
