ProJet MJP 2500W User Manual

8/10/22, 2:55 PM
Quick Start Guide
infocenter.3dsystems.com/projetmjp2500w/print/book/export/html/861
1/26
Quick Start Guide

ProJet MJP2500W/ IC

Quick Start Guide

p/n 33-D130 Rev C

Original Instructions
Please refer back tohttp://infocenter.3dsystems.com/projetmjp2500w/quick-start-guidefor the most up-to-date quick start guide
Introduction
ProJet MJP 2500W
The ProJet®MJP2500W3D printer system is a Multi-Jet Printer (MJP) printer. The solid imaging 3D printer produces wax casting patterns
from 3D solid Computer-Aided Design (CAD) models and through the 3D printer system client software. The parts are generated in a rapid
prototype (RP) environment. The primary features of the printer are the user interface, build chamber including the print engine, and the material
delivery module (MDM), which contains the materials and waste bag.
VisiJet® Materials for ProJet®MJP 2500W
ProJet®MJP 2500W
VisiJet®M2 Cast(PW - Part Wax)
VisiJet® Wax Jewel Red(PW - Part Wax)
NOTE:The ProJet® MJP 2500W is a wax printer and thus has no UV lamps installed.

®

ProJet MJP 2500W Specifications

General

Technology	MultiJet Printing (MJP)
Build Volume	294 x 211 x 144 mm (11.6 x 8.3 x 5.6 in)
Layer Thickness	32, 50, 100 microns
Material	VisiJet M2 Series
Connectivity	Ethernet, USB
Materials	Visijet M2 Series (wax-like, rigid, flexible, high temp)

Summary

Safety Information and Precautions

Safety Symbols and Definitions

Explains hazard symbols and their meanings for safe operation.

General Safety Guidelines

Provides essential safety rules for operating the 3D printer system.

Protective Equipment and First Aid

Recommends protective gear and first aid for material exposure.

Skin, Eye, and Inhalation Safety

Details precautions for skin contact, eye exposure, and fume inhalation.

User Interface (UI) Navigation

Status Tab Functions

Prints Tab Functions

Materials Tab Functions

Tools Tab Functions

Outlines the diagnostic and maintenance routines available in the Tools tab.

Settings Tab Functions

Printer Startup and Basic Operations

Powering On the Printer

Step-by-step instructions for powering on the 3D printer system.

Installing New Material Cartridge

Procedure for installing new material cartridges into the MDM.

Removing Material Cartridges

Steps for safely removing existing material cartridges from the MDM.

Waste Bag Removal and Installation

Print Platform and Demo Build

Print Platform Removal and Installation

Shutting Down the Printer

Printer Shutdown Procedure