ProJet MJP 2500W Original Instructions

Facility Requirements Guide

ProJet MJP2500,MJP 2500 Plus &
MJP 2500W

Facility RequirementsGuide

p/n 33-D131Rev C

Original Instructions
Please refer back tohttp://infocenter.3dsystems.com/projetmjp2500/facility-requirements-guidefor the most up-to-date facility
requirements guide
About This Manual
This document includes the overall facility requirements that will be needed to have a successful installation when our authorized 3D Systems
representatives arrive to install your 3D printer system.
®

ProJet MJP 2500W Specifications

General

Technology	MultiJet Printing (MJP)
Build Volume	294 x 211 x 144 mm (11.6 x 8.3 x 5.6 in)
Layer Thickness	32, 50, 100 microns
Material	VisiJet M2 Series
Connectivity	Ethernet, USB
Materials	Visijet M2 Series (wax-like, rigid, flexible, high temp)