The Quick Start Guide gives the user a quick overview of the 3D printer system and the
procedure for printing a part with theProJet® MJP 2500. An electronic version of this
document is available at http://infocenter.3dsystems.com/projetmjp2500/quick-start-guide.
ProJet® MJP 2500 Global Harmonized Standards/Safety Data
Sheets (GHS/SDS)
Each material has its own GHS/SDS. The user must be familiar with all information
contained in these documents before handling the materials. Every material shipment
includes a paper copy of its GHS/SDS.
Electronic versions of the GHS/SDSs are available on our website at
http://www.3dsystems.com/support/materials/msds.
NOTE: All of the documentation listed here is available by following links listed in the
descriptions above.
Electronic Documentation
3D SPRINT Help
The 3D SPRINT printer application provides a complete on-line help guide for understanding
how to utilize and manage the client software used for part layout and job submission to
your new printer.
User Interface
User Interface
The User Interface is located on the top of the printerto the right. There are ve main
screens that contain sub menus that allow the user to perform a variety of functions to
control the printer. These vescreens and their menus are:
To Next Page
Loading...
