Waiting - Chamber Cooling Down - Printer is waiting for the build chamber to cool down
before continuing printing
Initializing - Printer is powering on and going through initialization
Shutting Down - Printer is shutting down and will notify the user when it is safe to power
off the printer
Recovery - Printer has a fault and is attempting recovery
Diags - Printer is in Diags mode and may require a service call
Error - Printer is in an Error state and may require a service call
Top Door Open - Close the top door in order for maintenance or printing to occur.
Material Needed -the printer needs more material in order to print
4. Part Material Installed- Displays material type installed and status (tile changes color if
material needs attention). Click on the tile to bring up the Materials tab.
5. Material Drawer - Displays the state of the Material Drawer - Closed, Locked, Open to help user
quickly identify when it is accessible.
. Waste Bag /Maintenance Status - Displays the percentage and status of the waste bag and
other maintenance items. Click on the tile to bring up the Operator Maintenance tab.
7. Print Mode, Layer - This area displays the current layer and print mode information.
. Start Time, Estimated Time, Completion Time - Displays the print job printing time information.
Prints Tab (B)
Second Tab on the UI.
1. Opens up the Print Queue to manage the print queue of jobs for the printer.
To Next Page
Loading...
