2. Adjust the length of the window slider kit according to the window width or height, and fix it with
the dowel;
3. Insert the window connector of the hose to the hole of the window kit(Fig.11).
Fig.10 Fig.10a
Fig.11
7.3 Water Full alarm
The inner water tray inside the air-conditioner has one water level safety switches, it controls
water level. When water level reaches an anticipated height, the water full indicator lights up. (If
water splash motor is damaged, when the water is full, please remove the rubber blockage at the
bottom of unit, and all water will be drained outside.)
To Next Page
Loading...
Need help?
General
