appliance is in use, as this may cause burns
or scalding.
DESCRIPTION
1. Top cover
2. Water tank
3. Water level indicator window
4. Power on/off button with
indicator light
5. Warming plate
6. Stainless steel jug
7. Filter holder
8. Mesh filter
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Carefully unpack the appliance and remove all packaging materials.
Wipe the appliance with a slightly damp cloth. Dry thoroughly.
It is recommended to wash the drip coffee system before first use.
Fill the water tank with cold water and follow the directions for making drip coffee to
make at least two jugs of coffee without using ground coffee.
Switch off the coffee maker and allow it to cool before refilling with cold water.
MAKING DRIP COFFEE
1. Place the appliance on dry, level and heat-resistant surface, away from any edge.
2. Open the top cover.
3. Fill the water tank with the required amount of fresh, cold water using the water
level indicator as a guide.
The markings on the water tank window indicate level of water required to
brew the desired number of cups.
To avoid overflow, do not fill the water tank with water past the max line.
4. Place the mesh filter into the filter holder, making sure it is assembled correctly.
Downloaded from www.vandenborre.be
To Next Page
Loading...
Need help?
General
