56
The side at which the door opens can be changed, from the right side (as supplied)
to the left side, if required.
Warning ! When reversing the door, ensure that the appliance is unplugged
from the mains socket. To reverse the door, the following steps are generally
recommended.
1. Stand the appliance upright. Open the door to take out all the shelves. Close
the door.
2. Remove the screw hole cover (9) and upper hinge cover (7) on the top panel
of the appliance.
3. Unscrew the screws (6) that x the upper hinge (5) using an 8 mm socket
driver or spanner.
4. Remove the upper hinge (5).
5. Move the core cover (8) from left side to right side. And then lift the door and
place it on a padded surface to prevent it from scratching.
6. Lay the appliance on soft foam packaging or similar material. Remove both
adjustable feet (3)(4).
7. Unscrew the screws (1) that x the lower hinge on the bottom of the
appliance and then remove the lower hinge (2).
8. Unscrew the lower hinge axis and install it on the hole of the reverse side.
DOOR CONVERSION
1
2
3
4
5
6
7
8
9
To Next Page
Loading...
