PRC2402M - Setting up for Singtel Internet with ONT Connection
Notes:
- All physical connection is assumed to be connected properly and working.
- Below diagram depicts correct physical connectivity setting
Step 1. Connect the PRC2402M Router’s WAN port to Optical Network Terminal’s LAN 1
Step 2. Go to http://prc2402m.setup or http://192.168.123.254 and Go through the Setup Wizard
Step 3. Click Setup
Step 4. Click Internet Settings
Step 5. Click VLAN
Step 6. Set the same as per below screenshot and press Apply button to proceed
Step 7. Power On the other mesh node.
To Next Page
Need help?
General
