Prolon T1000 - Operating the T1000 Thermostat; Touch Pad Control Interface; Understanding Hint Displays; Changing Thermostat Setpoints

Operation
The T1000 is controlled using the
circular touch pad on the bottom half
of the thermostat. The touch pad
uses capacitive sensing technology
to detect finger proximity. There are
no moving parts to push or rotate.
The T1000 is controlled using simple
scrolling, tapping or holding motions,
performed around the circle of the
touch pad. The center of the circle is
unused.
Tap here to
go BACK
Tap here to
ENTER
Scroll clockwise or
counterclockwise
to adjust or navigate
FEEDBACK
The black
arc follows
your finger
22.8 ºC
Hint Display
At the bottom of the screen, a circle
representing the touch pad is
displayed, with hints on how to
navigate and modify settings, as well
as providing feedback as you
manipulate the touch pad. Hints are
context-sensitive and will only
display where logical.
HINTS
Hold your finger over
highlighted areas to use
special features
Changing the setpoint
2