Prolon T1000 User Manual

T1000
User Guide
Introduction
The T1000 digital thermostats are designed for operation in conjunction with
the ProLon VC1000 VAV zone controllers, to which they provide zone
temperature, setpoint and occupancy status override information. They also
provide an access point from which to visualize and configure any parameter on
the connected VC1000 through an on-screen menu system. The T1000 features
a circular capacitive touch pad, graphic LCD screen with backlighting and an
auxiliary analog input suitable for temperature averaging.
Installation
1. Open casing to remove back cover by
pushing on the tab located underneath the
thermostat. (Figure 1)
2. Pull wire(s) through central hole of back
cover.
3. Screw in the back cover to the wall.
4. Connect wires:
o If using twisted pair wires:
 Pull out the screw terminal
blocks.
 Remove 1 cm insulation from the
end of each wire.
 Connect the wires to the terminal
blocks and re-connect the
terminal blocks. (Figure 2)
 Reinstall terminal blocks.
o If using CAT5 cable:
 Plug the cable into the RJ45 jack
5. Reconnect top cover
Figure 1
Figure 2
Important: Do not install the thermostat under the following conditions:
x Any location exposed to direct sunlight
x On an outside wall
x Near an air discharge grill
x In a location where vertical air circulation is restricted
x Near a dimmer switch
1

Prolon T1000 Specifications

Power

supply voltage	24 VAC ±10%
power consumption	5 VA max

Input and Output

analog input	Thermistor 10K type3 / dry contact
input resolution	10 bit
outputs	None

Display and Interface

screen resolution	80x130 pixels
screen type	LCD with back lighting
touch interface	Circular capacitive touch pad

Operating Environment

operating temperature range	0-50 ºC (32-122 ºF)

Weight and Dimensions

dimensions	82 mm x 126 mm (3.23" x 4.96")
weight	0.1 kg (0.22 lb)
mounting dimensions	2" x 4"

Summary

Introduction to T1000 Thermostat

Product Overview and Features

Details the T1000 thermostat's function with VC1000 controllers and its touch pad/LCD interface.

T1000 Thermostat Installation

Step-by-Step Installation Guide

Instructions for opening casing, wiring connections (twisted pair, CAT5), and reassembly.

Installation Site Recommendations

Advises against installing near sunlight, vents, or dimmer switches for optimal performance.

Operating the T1000 Thermostat

Touch Pad Control Interface

Explains operation using the circular capacitive touch pad for navigation and commands.

Understanding Hint Displays

Describes the contextual hints provided on the screen to guide user interaction.

Changing Thermostat Setpoints

Adjusting Temperature Setpoints

Guides on modifying heating and cooling setpoints via scrolling or tapping the touch pad.

T1000 Schedule Overrides

Performing Schedule Overrides

Details the procedure for overriding scheduled operation using touch pad hold gestures.

Navigating T1000 Menus

Menu Navigation Methods

Explains how to access Configuration and Visualisation menus using left/right touch pad holds.

Interacting with Menu Options

Describes scrolling through menu levels and selecting items via tap and hold.

T1000 Thermostat Specifications

Technical and Electrical Specs

Lists power, inputs, screen, interface, processor, connections, and environment details.

T1000 Thermostat Dimensions

Physical Size and Mounting

Provides the physical dimensions and standard mounting box compatibility for the thermostat.