Prolux Lite - Cleaning and Maintenance; Unit Cleaning Procedure

3.
Spray the surface to be cleaned.
4.
Connect the hose to the suction side of the vacuum.
5.
Use extraction tool #20 to scrub your surface and suck out the dirty water.
For more scrubbing power you may also use the mini head tool #25. The
extraction tool #20 will suck the most water out.
Then you’re done and that is how you shampoo your upholstery surfaces with the
Prolux Wet Dry Garage vacuum.
Cleaning and Maintenance
Unit cleaning:
Follow the steps below to get your filter, cloth filter and copper probe poles cleaned.
16
A. Remove the dust
bucket
B. Take out the dirt
tank and empty it.
C. Unscrew and take out the cloth filter
D. Remove and take out the cloth filter to wash
(see image below)