Promag ER755 - Configure ER750;ER755 Reader Settings; Launch Reader Utility Software

4
TM970166A
Ethernet Reader Quick Start
Configure ER750/ER755 Reader Settings
Step 1
Run “EthernetReaderDiscover” software
to search all available Ethernet devices on
network.
Select your device, and then click “Reader
Utility”.
Remark:
“ ” – means the communication successfully by the IP address
and the device name.
“ ! ” – means the communication by the IP address.
“ X” – means the communication fail.
Step 2
The “Ethernet Reader Discover” utility will
execute the “Mifare/DESfire Reader
Utility” and connect to the selected reader.
< ER750 >
Remark:
For ER750, the “Read Mode” fixed to “CSN Only”.
Configure ER750/ER755 Reader Settings