Do you have a question about the ProMariner ProSport8 and is the answer not in the manual?
Key safety warnings and precautions for operating and installing the battery charger.
Instructions for proper grounding and AC power cord connection to prevent shock.
Specific precautions for working near batteries and handling battery acid.
Steps and precautions before connecting batteries for charging.
Guidance on selecting a charger location and making DC connections.
Information regarding FCC Class A compliance for potential interference.
Explanation of the charger's LEDs for operation status and battery bank troubleshooting.
How the charger distributes amps to batteries for faster, efficient charging.
Guide to choosing the correct charging profile for different battery types.
Step-by-step instructions for correctly wiring the ProSport charger to batteries.
Diagrams for ProSport 15/20 3-bank chargers with various battery configurations.
Diagram for 36V trolling motor setup using 3x 12V batteries with series jumpers.
Diagrams for ProSport 2-bank chargers with 2x 12V battery configurations.
Diagram for 2-bank chargers with 2x 12V batteries connected in parallel.
Diagram for ProSport 6 1-bank charger with a single 12V battery.
Routine checks and cleaning procedures for the charger and connections.
Diagnosing issues related to AC power, charge mode, or battery type LEDs.
Resolving faults indicated by the System Check OK and Battery Bank Trouble LEDs.
Steps to take when the charger is on but not charging the batteries.
List of available accessories for the ProSport chargers.
Details of the limited two-year warranty covering defects in material and workmanship.
| Output Voltage | 12V |
|---|---|
| Output Current | 8A |
| Number of Banks | 2 |
| Input Voltage | 120VAC |
| Charger Type | Automatic |
| Compatibility | 12V Batteries |
| Type | Marine Battery Charger |
| Battery Type | Lead-Acid, AGM, Gel |
| Protection Features | Short Circuit |
| Cooling | Fan-cooled |












Loading...