To Next PageTo Next Page
Need help?Do you have a question about the ProMariner ProNautic 2430P and is the answer not in the manual?
Inspect the ProNauticP unit and its package contents upon arrival for any damage.
Crucial instructions to read before installing or operating the ProNauticP Series charger.
Warnings regarding explosive gases generated by lead-acid batteries during operation.
Safety measures for individuals working near batteries, including eye protection and avoiding sparks.
Guidelines for personal safety when preparing to charge batteries on or off-board.
Instructions for connecting the AC and DC grounding systems for safety and fault current.
Requirements for AC installation, including breaker safety and connection integrity.
Guidance on selecting the appropriate AC breaker size for charger models.
Recommendations for selecting appropriate DC cable sizes based on wire length and amperage.
A checklist and procedure for initial setup and operation after installing the remote panel.
Explanation of the LED indicators on the charger and their meanings during operation.
Information on selecting the correct battery type and charging profile for optimal performance.
Step-by-step guide to selecting the appropriate battery type for the charger.
Instructions for customizing charging parameters for specific battery chemistries.
Procedure for initiating and understanding the charger's self-test function.
Guidance on using the equalization feature for flooded lead-acid batteries.
How to adjust the charger's amperage draw for low power situations.
Description of fault indicators and conditions that may require service.
General| Output Current | 30A |
|---|---|
| Number of Banks | 3 |
| Input Frequency | 50/60 Hz |
| Efficiency | 85% |
| Cooling | Fan Cooled |
| Input Voltage | 120VAC |
| Battery Type | Gel, AGM |
| Protection Features | Over-voltage, reverse polarity, short circuit, over-temperature |
| Operating Temperature | 0°C to 50°C |
