ProMariner ProNautic 1250P - User Manual

Digital ProMar
Performance Charging
Digital ProMar
Performance Charging
Model Number: Serial Number: Date of Purchase:
PLEASE RECORD YOUR:
IMPORTANT NOTICE
This manual contains important safety and operating instructions for the ProNauticP Series Chargers.
Please save and read all safety, operating and installation instructions before installing or applying
AC power to your ProNauticP Charger.
Please call our Customer Care Department at 800-824-0524 from 8:30 am to 5pm Eastern Time
for any warranty, service or installation assistance. Thank you - ProMariner Customer Care
Your Satisfaction is Important to Us!
Do not return this product to retailer or dealer for any service or warranty requirements.
Model Number: Serial Number: Date of Purchase:
PLEASE RECORD YOUR:
ProNauticP Series Instruction Manual
Models Part No. Amperage Banks Volts
ProNautic1210P 63110 10 Amps 2 Banks 12
ProNautic1215P 63115 15 Amps 3 Banks 12
ProNautic1220P 63120 20 Amps 3 Banks 12
ProNautic1230P 63130 30 Amps 3 Banks 12
ProNautic1240P 63140 40 Amps 3 Banks 12
ProNautic1250P 63150 50 Amps 3 Banks 12
ProNautic1260P 63160 60 Amps 3 Banks 12
ProNautic2420P 63170 20 Amps 3 Banks 24
ProNautic2430P 63180 30 Amps 3 Banks 24
Professional Mariner, LLC
200 International Drive, STE 195
Portsmouth, New Hampshire 03801
TEL: 603-433-4440
FAX: 603-433-4442
www.promariner.com
12/11 A
specifications subject to change without notice
Visit ProMariner online at www.promariner.com, for a complete
selection of quality marine products...
Here are just a few:
Visit frequently, we are always adding new products for your
boating enjoyment!
ProMite Series - Recreational Grade Waterproof Marine Battery Chargers
ProSport Series - Heavy Duty Recreational Grade Waterproof
Marine Battery Chargers
ProTournament Series - Professional Grade Tournament
Waterproof Marine Battery Chargers
ProIsoCharge Series - Digitally Controlled Zero Loss Charging Isolators
Digital Mobile Charge In-Transit Chargers
Battery Maintainers
AC Plug Holders
Battery Isolators
Isolation Transformers
Galvanic Isolators and Monitored Systems
Corrosion Control Products
Waterproof Marine Binoculars
Gold Plated Fuses and Holders
A Complete Line of Hand Held Test Meters
Online Technical Support and Service Support

Summary

Important Product Notice

Product Introduction

Unpacking and Inspection

Details on how to unpack and inspect the ProNauticP unit and its contents.

Product Features

High Line Features

Advanced features of the ProNauticP Series charger.

Standard Features

Standard features of the ProNauticP Series charger.

General Warnings and Cautions

Electrical Hazard Warnings

Covers high voltage, low voltage, and electrical shock hazards during operation.

Critical Safety Instructions

Explosive Gas Safety

Precautions regarding explosive gases generated by batteries during charging.

Personal Safety Precautions

Guidelines for personal safety when working near batteries.

Battery Handling Safety

Safety measures for preparing batteries for charging on or off the boat.

Electrical Connections

Grounding Procedures

Instructions for AC and DC grounding of the ProNauticP unit.

AC Installation Connections

Details on AC installation materials and required connections.

Installation Guide

Permanent Installation & Circuit Protection

Guidance on permanent installation, circuit protection, and cable selection.

Choosing DC Conductors

Recommendations for selecting appropriate DC conductors based on length and amperage.

Making Electrical Connections

Instructions for making proper ring or spade terminal connections.

Split Ferrite Installation

Instructions for installing the split ferrite unit included with specific models.

Fuse Selection

Grounding Requirements

Handling Empty Charger Banks

Temperature Sensor Probe

Probe Connection Details

Instructions for connecting the temperature probe to the battery and charger.

Optional Remote Installation

Optional Remote Start-Up Guide

Steps for connecting and verifying the optional remote display.

Setup and Operation

LED Status Indicator Center

Explanation of LED indicators for charger status and faults.

Initial Setup Procedures

Steps for initial setup, including battery type selection.

Battery Type Selection

Guidance on selecting the correct battery type for optimal charging.

Power Factor Correction & Global AC Input

Information on the charger's AC input capabilities.

Charging Rate Information

Details on multi-stage charging processes.

Pre-Operation Checklist

Essential checklist before operating the ProNauticP charger.

Optional Remote Display Operation

On-Unit Indicators and Displays

Charger Service Conditions

Auto Conservation Mode

Digital Display Information

Programming the Charger

Selecting Battery Type

Step-by-step guide to selecting the correct battery type for charging.

Custom Battery Type Adjustment

Instructions for customising battery type settings.

Self Test Mode

How to initiate and interpret the self-test mode.

Equalization Procedure

Procedure for performing battery equalization charging.

Power Level Adjustment

How to adjust the charger's power level output.

Factory Reset Procedure

Programming with Optional Remote

Remote Panel Menu Options

Remote Control Shortcuts

Troubleshooting Guide

Charger Fault Conditions

Explanation of fault indicators and their meanings.

Maintenance Schedule

Dimensions Overview

Typical Wiring Configurations

3 Bank 12 V DC Wiring Configuration

Diagram and instructions for a 3-bank 12V DC common ground installation.

2 Bank 12 V DC Wiring Configuration

Diagram and instructions for a 2-bank 12V DC common ground installation.

Single 12 V DC Wiring Configuration

Product Warranty Information

ProMariner ProNautic 1250P Specifications