To Next PageTo Next Page
Need help?Do you have a question about the ProMariner ProNautic 1260P and is the answer not in the manual?
User precautions for working near batteries, including eye protection and acid contact.
Warnings regarding explosive gases generated by lead-acid batteries.
Safety steps for preparing batteries for charging, including terminal disconnection.
Instructions for connecting the chassis ground and DC negative bus.
Details on AC wiring, breakers, and secure connections.
Permanent wiring requirements and circuit breaker sizing for safe installation.
Guidance on making secure connections and routing cables properly.
Instructions for installing the split ferrite unit on AC input cables.
Guidance on selecting appropriate fuses for charger output conductors.
Instructions for connecting and positioning the temperature sensor probe.
Steps for initial setup and verification of the remote control unit.
Explanation of LED indicators and their meanings for charger status.
Guide to configuring the charger for specific battery types and settings.
Description of the charger's digital displays and LED indicators.
Information on using the optional remote display for monitoring and control.
Guide to selecting and customizing charging profiles for different batteries.
Procedures for running self-tests and initiating equalization charging.
Setting the charger's amperage draw for low power situations.
Steps to reset the charger to its original factory default settings.
Using the optional remote for programming, navigation, and shortcuts.
Explanation of fault indicators and service requirements.
General| Output Current | 60A |
|---|---|
| Cooling | Fan Cooled |
| Battery Type Compatibility | Flooded, AGM, Gel |
| Number of Banks | 3 |
| Input Voltage | 90-265V AC |
| Output Voltage | 12 VDC |
