To Next PageTo Next Page
Need help?Do you have a question about the ProMariner ProNautic 1240P and is the answer not in the manual?
General| Output Current | 40 Amps |
|---|---|
| Number of Banks | 3 |
| Input Frequency | 50/60 Hz |
| Cooling | Fan Cooled |
| Warranty | 2 Years |
| Output Voltage | 12 Volts |
| Battery Type | AGM, Gel |
| Protection Features | Reverse Polarity |
| Charging Stages | 4 (Bulk, Absorption, Float, Storage) |
Contains critical safety and operating instructions for the ProNauticP Series Chargers.
Instructions for service or warranty requirements, directing customers to call customer care.
Provides an overview and congratulations on the purchase of the ProNauticP Series charger.
Covers warnings against operating damaged units and the importance of reading the manual.
Cautions about inspecting existing AC/DC electrical components and using certified technicians.
Information on FCC Class B notification and international standards compliance.
Covers high/low voltage, rain/spray exposure, and hot surface warnings.
Precautions for working with batteries, including explosive gases, eye protection, and avoiding sparks.
Advice on charging specific battery types, saving the manual, and avoiding damage.
Safety instructions for battery location, ventilation, and general installation.
Details on AC grounding, DC grounding, and main breaker safety.
Guidance on AC shore power disconnection, breaker sizing, and cable selection.
Table detailing wire length and AWG size for various ProNauticP models.
Instructions for making connections and installing the split ferrite unit.
Guidance on fuse selection, battery negative connection, and chassis ground.
Instructions for connecting the temperature probe for thermal compensation.
Information on installing the optional remote panel and connecting its cable.
Explanation of LED indicators for AC power, PFC, and charger status.
Details on the default charging profile and battery type considerations.
Information on global AC input and multi-stage charging capabilities.
A checklist to ensure correct connections and power application before operation.
Explanation of on-unit LED indicators and digital displays for charger status.
Description of LED indicators for Charge, Conditioning, Ready, and Equalization modes.
Explanation of LED indicators for reverse polarity, low/high voltage, and high temperature.
Guide to selecting battery types and charging profiles, including custom settings.
Procedure for initiating and understanding the self-test function.
Instructions for equalization charging and adjusting the charger's power level.
Details on programming settings including factory reset and remote control options.
Guidance on fault indications and contacting customer care for service.
Table explaining LED fault indications and potential causes.
Checklist for verifying LED status, fuses, ventilation, and connections.
Provides dimensional drawings for ProNauticP 12V 10-40 Amp and 24V 20 Amp models.
Provides dimensional drawings for larger ProNauticP models and the optional remote.
Diagram for a typical 3 bank 12 Volt DC common ground installation.
Diagram for a typical 2 bank 12 Volt DC common ground installation.
Diagram for a typical single 12 Volt DC common ground installation.
Information on registering the warranty and the five-year limited warranty terms.
