To Next PageTo Next Page
Need help?Do you have a question about the ProMariner ProMar1 5 and is the answer not in the manual?
General| Model | ProMar1 5 |
|---|---|
| Type | Battery Charger |
| Input Voltage | 120V AC |
| Output Voltage | 12VDC |
| Output Current | 5A |
| Number of Banks | 1 |
| Battery Type | Lead Acid |
| Charging Stages | 3 |
| Protection Features | Reverse Polarity |
General safety guidelines for using the battery charger and working near batteries.
Specific safety measures for individuals working near batteries, including protective gear and first aid.
Precautions to take before and during battery charging, including ventilation and terminal cleaning.
Notice regarding FCC Class A compliance and steps to minimize potential interference.
Introduction to the ProMar1 Battery Charger, its features, and models.
Explanation of different battery types and compatibility with the charger.
How to operate the charger, its LED indicators, and charging status.
Details on the float/maintenance mode and its voltage characteristics.
Instructions for mounting the battery charger securely and in a suitable location.
Further steps for installing the charger, including preparing batteries and connecting wires.
Introduction to wiring diagrams for connecting the charger to batteries.
Diagram and instructions for wiring a single output charger for a 12V battery.
Diagrams and instructions for dual output chargers for 2x12V batteries.
Wiring for dual output chargers in 24V configurations.
Diagrams and instructions for triple output chargers for 3x12V batteries.
Step-by-step guide to charging batteries using the ProMar1 charger.
Explanation of how the charger distributes amps for faster charging.
Instructions for cleaning and tightening battery connections monthly.
Guidance on monitoring and maintaining battery electrolyte levels monthly.
Instructions for inspecting DC output wiring for damage monthly.
Instructions for inspecting AC power cord and mounting hardware monthly.
Steps to troubleshoot when no LED indicators are displayed.
Troubleshooting steps when batteries are not charging despite active LEDs.
Details on the two-year limited warranty, coverage, and conditions.
Instructions on how to make a warranty claim and contact information.
Details for the 5 Amp single bank charger model.
Details for the 5/3 Amp dual bank charger model.
Details for the 5/5 10 Amp dual bank charger model.
Details for the 5/5/3 13 Amp triple bank charger model.
Information on ProSport battery maintainers and plug holders.
Details on remote status monitors and battery bank cable extenders.
Information on the handheld digital multi-meter for testing.
