Promaster SystemPRO User Manual

Infrared Remote Control – for Olympus
To use the PROMASTER Infrared Remote Control for Olympus
1.
Before using the remote for the first time, remove the plastic separator
from the battery holder.
2. Mount the camera on a tripod (recommended) or place the camera on a
stable, level surface.
3. Press the center “S” button on the remote and rotate the main command
dial on your camera until (delayed remote) or (quick response remote) is
displayed in the control panel.
1
4. Aim the transmitter on the remote control at the infrared receiver on the
camera (usually within +/- 40 degrees of the lens axis, from left to right and
top to bottom) and press the shutter-release button on the remote control.
When using the remote outdoors, make sure that the subject is not backlit
and that the line of site between the transmitter and the infrared receiver is
not blocked by the lens or other obstacles.
5. How the camera focuses and shoots depends on the options you have selected on your camera. For
further information, check your camera's manual.
6. Infrared cannot be seen by human eyes so you will see no visible light from the LED on the front of the
remote control during operation.
 Identifying the buttons
S
Camera shutter release
T
Operates telephoto function
W
Operates wide angle function
Move forward (replay mode)
Move Backward (replay mode)
 Specifications
 100% compatible with Olympus RM-1 Remote
 Easy-to-replace CR2025 lithium battery
 Operating temperature: 5 °C to 40 °C (40 °F to 105 °F)
 Typical Battery Life: up to 3 years, 20,000 exposures.
 Operation distance: 1cm–20meters
1
For further information, check your camera's manual.
1

Promaster SystemPRO Specifications

General

Brand	Promaster
Model	SystemPRO
Category	Remote Control
Language	English

Summary

Using the Infrared Remote Control

Initial Setup and Operation

Steps for first-time use, camera mounting, and aiming the remote.

Focus and Shooting Behavior

How camera settings affect focusing and shooting with the remote.

Infrared Operation Visibility

Notes that infrared operation is not visible to the human eye.

Identifying Remote Buttons

Shutter Release Button

The 'S' button operates the camera shutter release.

Telephoto Function Button

The 'T' button operates the telephoto function.

Wide Angle Function Button

The 'W' button operates the wide angle function.

Replay Mode Navigation

Arrow buttons control forward and backward movement in replay mode.

Product Specifications

Compatibility and Battery

Compatibility with Olympus RM-1 and easy-to-replace CR2025 battery.

Operating Conditions

Specifies operating temperature range and typical battery life.

Operational Range

Details the effective operation distance of the remote control.

Battery Replacement and Care

Procedure for Battery Replacement

Step-by-step instructions on how to replace the remote's battery.

Care and Storage Guidelines

Recommendations for storing and maintaining the remote control.

Camera Compatibility List

Limited Warranty Information