USER’S MANUAL. PROMAX-4
Page 8 Novembre 1999
Figure 1.-
CB-410 battery charger and mains adapter.
3.2
Installing the battery
Attaching the battery
Use
CB-038
batteries only.
To attach the battery, position it on the base of the arrows found on the back of
the instrument. Slide the battery until you hear a click and it remains fixed, as
shown in the figure 2.
Figure 2.-
Installing the battery.
Removing the battery.
The battery is accessible from the back of the instrument. To disconnect the
battery, press the tab found at one end of it (1) and move the battery to
separate it from the body of the instrument (2). The battery will be released from
its holder. Then slide the battery out, as shown in figure 3.
To Next Page
Loading...
