USER’S MANUAL. PROMAX-4
Page 24 Novembre 1999
4.3
Connection to the computer
The system may be connected to a PC by means of the connection cable which
is supplied with option RM-004.
Do not connect any cable other than that supplied by the
manufacturer with option RM-004, otherwise serious damage may be
caused to the equipment.
1. Prior to connecting the equipment to a PC, disconnect both from their
respective power supplies.
2. Connect the end of the connection cable corresponding to the
PROMAX-4
to
connection [6] and the other end to the parallel port of your computer. (See
the operation manual for the RM-400 for further information).
To Next Page
Loading...
