IN CASES OF MALFUNCTIONING
• Check that the power supply is correct.
• Check whether the hand unit is connected correctly to the
main unit.
• Check whether the unit is switched „on“ (the green control
LED (I) must be glowing).
• Check whether the fuse (J) is still intact.
The fuse is to be found on the rear side of the unit. Be-
fore changing the fuse, please be sure to unplug the unit
from the mains outlet. To change the fuse, use a screwdri-
ver to unscrew the fuse holder and replace the micro fuse
(T 2 A / 250 V).
• If the problems have still not been solved after following
these steps, please consult your service center immediately.
DE
US
FR
IT
ES
NL
RU
PL
SE
FI
To Next Page
Loading...