Promotech BM-21S User Manual

ul. Elewatorska 23/1, 15-620 Bialystok, Poland
Phone: +48 85 678-34-00, Fax: +48 85 651-15-31
www.promotech.eu e-mail: office@promotech.eu
OPERATOR’S MANUAL
B
B
M
M
-
-
2
2
1
1
S
S
BEVELLING MACHINE

Promotech BM-21S Specifications

General

Brand	Promotech
Model	BM-21S
Category	Power Tool
Language	English

Summary

General Information

Application

Describes the intended use of the BM-21S bevelling machine for plates and pipes.

Technical Data

Lists key specifications such as voltage, power, rotational speed, and dimensions.

Machine Design and Components

Equipment Included

Lists all standard equipment provided with the BM-21S bevelling machine.

Safety Precautions

Startup and Operation Procedures

Adjusting Bevel Angle and Width

Explains how to set the desired bevel angle and width on the machine.

Using Cutting Fluid

Instructions on applying cutting fluid to the workpiece before bevelling.

Adapting for 150–300 mm Pipes

Procedure for adapting the machine to bevel pipes of 150–300 mm diameter.

Adapting for 300–600 mm Pipes

Procedure for adapting the machine to bevel pipes of 300–600 mm diameter.

Operating the Machine

Step-by-step guide on how to operate the BM-21S bevelling machine.

Replacing Cutting Inserts

Instructions for safely replacing worn cutting inserts on the machine.

Replacing the Milling Head

Guide on how to remove and install a new milling head for the machine.

Wiring Diagram

Spare and Wearing Parts

Declaration of Conformity

Quality Certificate

Warranty Card