EasyManua.ls Logo

Pronto 2 - Assembly Procedures; Wheel Assembly

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
01. Assembly of front/rear wheels
02. How to unfold frame
<Front wheels>
<Rear wheels>
① Attach the front wheel so that it makes a 'click’ sound as it passes the locking groove. Repeat procedure on the opposite wheel
② To remove the front wheels, depress the rectangular 'release button' and pull the wheel off
① Release the buckle that connects the shopping basket to the backrest seat as shown in ①
② Release the folding lock on the right side of the wagon body toward the rear wheel to unlock as shown in ③
④ Pull up the handle of the wagon to unfold as shown in ⑤
⑥ Attach the fabric cover on both sides of the frame
Warning! When unfolding the frame, make sure to keep children at a safe distance.
① While holding down the release button in the center of the rear wheel, align it with the groove of the rear wheel shaft until it clicks
(Repeat procedure on the other wheel)
7
Assembly
5